2024-09-24 [8.2.5] (testing) -------------------------------------------------- openwrt - upgrade openwrt22 to 22.03.7 community - sort communities gui - fix missing text in backbone/private vpn after reloading page - fix page error on public contact page - fix password check and add info text - configure httpd to only accept one connection. This workarounds the issue when css is not loaded. wifi - remove obsolete adhoc mode router - re-enable 5ghz for GL.inet E750 2024-05-11 [8.2.4] (testing) -------------------------------------------------- community - add "Freifunk Geringswalde" router - add router ZyXEL NWA55AXE Backbone Server - switch to wireguard servers on initial setup - upgrade fastd backbone config to wireguard - add servers for Leipzig - set new default servers password - fix setting password when using special characters 2024-03-31 [8.2.2] (testing) -------------------------------------------------- WiFi - 5GHz client mode (WAN) wpa3 support added sysinfo - sysinfo.json gets a new network statistic section dsa-migration - prepare for updates where openwrt changes the minor compatibility version (e.g. dsa-migration) openvpn - remove obsolete openvpn firewall - increase security and internal improvments 2023-11-10 [8.2.0] (release) -------------------------------------------------- LED - wifi status LED (GW/Freifunk Status) is not static (instead of blinking) WiFi - add support for utf8 (emoji) in wifi scan 2023-09-02 [8.1.7] (testing) -------------------------------------------------- openwrt 22 - move some routers to openwrt 22 (revert iptables patch) - add some new routers gui - colorize "Knoten ignorieren" - add wetter info - add info whether 5GHz meshing is supported or not - add configuration switch to disable 5GHz tethering - add configuration switch to enable iOS tethering (default: off, to reduce 50% CPU load on some devices) LTE - add gl-inet GL-E750 with display support - add SIM Pin info router - add device DLink COVR X1860 USB - add usb serial console login (getty) timezone - fix storing user input for timezone WiFi - add 5ghz client mode (WAN: allows using other 5GHz AP as Internet source) - WLAN Scan: add infos about encryption - remove owl-loader from devices that do not use it - fix 5GHz outdoor channel range gateway check - reduce check time from 3min -> 1min reboot - optimize reboot when configuration was changed (no two reboots anymore) bmxd - v1.4: fix potential crash and improve code for development splash - remove splash competely syslog - reduce syslog traces and http error messages sysinfo - add wifi infos (htmode, bitrate) internal - remove old code (nodegroup) - add internal config switch to enable/disable STP for WAN/LAN bridge 2022-12-01 [8.1.6] (devel) -------------------------------------------------- usb-serial - add serial login via usb serial adapter (usb devices only, must be configured) wifi - check if meshing for 5GHz is supported - check if additional private access point is supported 2022-12-01 [8.1.5] (release) -------------------------------------------------- 2022-12-01 [8.1.4] -------------------------------------------------- private vpn - fix private vpn 2022-12-01 [8.1.3] (testing) -------------------------------------------------- backbone - update backbone server LED - adapt LED status for new router wifi - improve wifi infos in gui 2022-10-02 [8.1.2] (devel) -------------------------------------------------- bmxd - rework gateway selection to minimize wifi disconnections - reset DNS when no GW is selected gui - give more information about wifi channels - fix 5Ghz wifi scan sysinfo - set valid values for wifi channel when not present - set airtime to zero when wifi is not present router - add TP-Link Archer C6 v3, TP-Link Archer C6U v1 2022-10-02 [8.1.0] (release) -------------------------------------------------- led - minor improvments to led control (gui) 2022-09-15 [8.0.8] (testing) -------------------------------------------------- router - add router xiaomi_mi-router-4a-100m ddns - remove unused ddns 2022-05-x [8.0.7] (testing) -------------------------------------------------- sysinfo - add wifi channel info usb-tethering - rework usb tethering to support IPhone, Huawei 3372h-320, ZTE MF79U, TP-Link M7300 - add support for TP-Link routers TL-WR2543N, TL-WDR3600, TL-WDR4300 community - add group_id to group routers for any statistic/mapping reasons 2022-05-x [8.0.6] -------------------------------------------------- bmxd - reduce dead-node timeout - update routes immediately after removing next-hop node - remove bat0 tunnel stuff (safes 20kbyte) community - add Leipzig router - add TP-Link Archer C50/C59, TP-Link WR902AC gui - speed up backbone - process port number when requesting backbone parameters internals - add script (/etc/ddmesh/post-init.sh) to run user code after freifunk init has finished - prevent starting fastd if no backbone/privnet was configured 2022-04-x [8.0.5] -------------------------------------------------- wifi - fix 2.4ghz band selection for Aerohive router 2022-04-x [8.0.4] -------------------------------------------------- firewall - fix issue where seldomly backbone connection was created through freifunk network / freifunk gateway wifi - use 802.11s meshing only (adhoc can not supported anymore) 2022-04-15 [8.0.3] -------------------------------------------------- wifi - change ath10 firmware for more stable connection for Fritzbox 4040 - ath10k, disable dnyack (could be the reason for bad connections speeds for IPQ4018 (fritzbox 4040) Targets with this chip are not stable with openwrt. - disable adhoc per default (which is not supported by some wifi firmwares and is replaced with 802.11s) openwrt - update to 21.02.2 network - add option to force ethernet port to 100mbit/s (only "big" routers) LED - fix LED for xiaomi router 2022-04-00 [8.0.2] -------------------------------------------------- usb-tethering - add usb tethering for android/iOS (for selected devices) gui-ajax - add info when using ajax request - rework firmware download to avoid blocking when loading firmware infos - serveral minor improvments 2022-04-00 [8.0.1] -------------------------------------------------- openwrt 21 - upgrade to openwrt 21 (only from devices with openwrt 19) network - complete rework of internal network configuration (needed to support openwrt 21 and vlan meshing) mesh-lan - add meshing on vlan 9 (avoids need of bridging cable between wan and lan ports that causes issues on some devices) wifi-roaming - add light roaming (hotspot should use same gateway and should have same data transfer power, else roaming could select slow access points but with stronger wifi signal) gateway - add ipip gateway tunnel to increase network speed community - rework communities bmxd - remove unused code - some improvments on duplicate address detection - some tweaking to reduce load sub-community /bmxd - add community default route for gateway that ensure routing to other sub-communities. This will be used when a communtity is split up into sub-communities. - add network id gui-backbone - add possibility to enable/disable backbone configurations - wireguard: add ajax server registration gui-speedtest - improve speedtest gui-syslog - change color for wifi related entries (red to some other) gui-led - add option to control LEDs gui-nodes - change alternating background color "grouping" to better display interfaces belonging to same node gui-network - implement openwrt 21 network ports (switch DSA) gui-vlan - configure mesh vlan - ignore nodes for vlan gui-wifi - let display wifi scan page competely and start scanning afterwards splash - hide splash if not used (will be removed in future) sysinfo - add wg_pubkey and roaming flag system-cron - nightly reboot/firmware update: add option to configure maintenance time build-system - fix some configuration dependencies - add default openwrt config as basis for creating new config files - some other build script improvments - support to build images via docker 2021-05-2 [7.0.3] (release) -------------------------------------------------- bmxd - improvments to bmxd watchdog gui - minor text corrections ssh - add ssh-key (authorized_keys) support led - improve LED detection 2021-04-00 7.0.2 -------------------------------------------------- bmxd - add keep alive watchdog backbone - re-add wireguard interfaces to bmxd when bmxd has restarted firewall - enable lan gateway when router acts as public gateway 2021-02-13 7.0.1 (rc) -------------------------------------------------- wifi - disable external wifi button - fix wifi ssid certificates - replace let's encrypt certificates with own to avoid nodes registration and firmware download problems in future network - rework network interface naming network-gui - colorize interface names in node lists gui - improve wifi hotspot list sysinfo - new version for sysinfo.json openwrt - update to last openwrt release (19.07.05) statistic - internal minor fixes device support - add some new devices 2020-12-20 6.4.3 (master) -------------------------------------------------- syslog-gui - reformat syslog (logread) backbone-wg - fix firewall rules boot - add boot delay to workaround boot issues where openwrt runs network initialisations parallel in background and does not provide a final "ready-event" to rely on firewall - hotplug fixes - rework firewall setup for several ddmesh scripts firmware upgrade - stop background tasks that could disturb upgrade process 2020-12-20 6.4.2 (master) -------------------------------------------------- wifi - add 5GHz mesh support for indoor - add 5GHz wifi scan (set to 10s update) certificates - update to new let'encrypt ca certificates (secures registration and firmware download for next 5 years) ignore nodes - add configuration to ignore node connections via mesh 2.4/5Ghz fail-safe - fix reset button to start router in fail-safe mode 2020-00-00 6.3.1 (master) -------------------------------------------------- wifi - add support for 802.11s mesh for large router (>8MByte Flash, >64MByte RAM) wifi-gui - add option to select 5ghz channel. it also controls if meshing is enabled - add option to ignore nodes for 802.11s mesh - get fritzbox 4040 wifi working (inkl. mesh 802.11s, uses ath10k wifi driver, not ct) 2020-11-25 6.1.4 (master) -------------------------------------------------- gui:backbone - fix and add backbone configuration openwrt - update openwrt and packages to new versions with (security fixes) backbone-fastd - udpate to v19 backbone-wg - router accepts incomming connections 2020-00-00 6.1.2 (master) -------------------------------------------------- ignore nodes - add configuration option to specify link type wifi - add private wifi (5GHz) 2019-12-08 6.0.15 (Release) -------------------------------------------------- autoupdate - control autoupdate by registrator server gui-system - remove obsolete type 'server' - make community "Tharandt" available wifi - add 2.4/5GHz radio detection - add 5GHz gui - add ath-dynack for some devices to speed up wifi connection opkg - rework path detection for downloading sw packages geoloc - add config to ignore specific access points (may be used for mobile nodes which get internet from LTE router) openwrt - change build system to create firmware for low memory/flash devices on different openwrt versions 2019-11-09 6.0.13 (devel) -------------------------------------------------- build.sh - more improvments openwrt - update 18.06 and 19.07 (different targets) - ar71xx tiny stick to updated 18.06 openvpn - add support to upload openvpn.conf file when this file contains all certificates - remove syslog errors incase no certs are installed - fix config issue for airvpn certificates traffic-shaping - removed, because it was never used mesh-on-wan - fix mesh-on-wan - speed up meshing for wan interface statistic-internal - fix adding firewall statistic rules for non-existing interfaces gui:network - display all interfaces (including disabled) wifi - change ssid to no-inet also for 5GHz radio nameserver - add new support for second freifunk DNS (including gui) reboot - add syncing filesystem before rebooting to ensure that configs are written backbone - update some libraries for fastd for more stability version - add more infos on firmware version to gui:system new devices - add new devices (fritzbox, Netgear, WR1200js) 2019-07-30 6.0.9 (testing) -------------------------------------------------- 18.06.2 - update openwrt, rename lede to openwrt gui-contact - add way to click into the map to set marker gui-network - add switch status gui-processes - display process tree wifi - prepare 5GHz support build scripts - improve build script, add build.json for configuration upload scripts - integrate upload scripts to generate directory structure for download server lte - add target GL.iNet gl-mifi (lte router) gui-lte - add minimal SIM-Card / modem configuration sysinfo - add network interface connection status mobile geoloc - add automatic location update gateway detection - fix gateway detection gui meshviewer - add link to meshviewer 2019-01-19 5.0.5 (release) -------------------------------------------------- Repro moved from github/ddmesh to github/freifunk-dresden 2018-09-19 5.0.5 (release) -------------------------------------------------- statistic - add wifi2 statistic for 1min,5min,15min,1h,6h,12h,24h,1W 2018-09-19 5.0.4 (testing) -------------------------------------------------- statistic - fix counting of wifi clients upgrade - add missing upgrade function for version 3.1.9 2018-08-29 5.0.3 (testing) -------------------------------------------------- registration - fix adding preferred node to registration url GUI - improve texts (Diego) wifi2 - add support for fix ip range, needed for portforwarding to wifi clients wifi3 - turn around configuration logic for wifi encryption - fix ssid encoding ddns - fix problem with default settings genererated by ddns script. This setting was not updated when domain name is changed by user reset - fix reset with factory settings 2018-05-13 5.0.2 (testing) -------------------------------------------------- gui-map - set default gps coordinates DSGVO - add text for DSGVO (Datenschutz Grundverordnung) Wifi - remove unneeded dhcp lease configuration (solves problem with invalid statistic for number of clients 2018-03-1 4.2.19 (testing) -------------------------------------------------- gui-map - replace google maps with openstreatmap (leaflet) booting - support devices which must be flashed in two steps (initramfs-kernel.bin + sysupgrade.tar) UBNT EdgeRouter-X bmxd - remove unused HNA, dynamic plugin loading (saves flash memory) - fix crash when using -d4/7/9 options wifi2 - add option to configure isolation meshing - separate lan and wan meshing to allow connecting different freifunk networks without forwarding private network 2018-02-1 4.2.18 (testing) -------------------------------------------------- lede update - Lede 17.01 (3.February 2018) wifi - add option to create 'open' private wifi 2018-01-1 4.2.17 (testing) -------------------------------------------------- firmware upgrade - fix firewall upgrade gui-wifi - fix formular check 2017-10-1 4.2.16 (testing) -------------------------------------------------- dhcp server - delete dhcp server config (lan) to disable server factory reset - fix factory reset for x86 non-jffs2 overlay file systems private wifi - prepare encrypted wifi (WPA2-PSK) bridged with lan/wan gui-progress-bar - implement javascript progress bar (remove animated gif) factory reset - fix not working factory reset firmware download - switch to new "download.json" to get all needed data for nightly update and manual update from within firmware (remove hardcoded filenames) sysinfo.json - add link type to neighours (bmxd --links) - add "auto update" info statistic - separate input/output/forward statistic 2017-10-1 4.2.10 (testing) -------------------------------------------------- firmware upgrade - fix upgradeing credentials firewall/network - reduce firewall rules by creating one mesh zone and add tbb-fastd, wifi and meshwire to it syslog - remove issues where syslog has displayed errors issues: openvpn with certificates from Freifunk Berlin e.V. not working 2017-10-1 4.2.9 (testing) -------------------------------------------------- lede support - for needed changes to support lede passwd - factory resetted device can be accessed without passwort (instead default password) dnsmasq - has still problems, Please specifiy second DNS in "Verwaltung-System" with 8.8.8.8 as workaround sysupgrade - fix problem with sysupgrade where no firmware could be loaded via gui. please load software paket fix_428.. to fix firmware update via gui when upgrading from 4.2.8 if needed. gui-firmware update - disable download button if no newer version is present (prevent downgrade issues) issues: openvpn with certificates from Freifunk Berlin e.V. not working 2017-09-12 4.2.8 -------------------------------------------------- lede support - add lede support for ar71xx and x86 lede gui - change color of info bar to blue (also for better reading) hotplug - correct usage of hotplug event for wifi interface (adding interface to bmxd) boot - lede: correct waiting for wifi interface before setting up firewall dnsmasq - move from plain config to uci-config gui-sysinfo - correct displaying free memory 2017-08-06 4.2.6 Development state (NOT stable) -------------------------------------------------- bugfix booting - wait for wifi before firewall setup restart-gui - reconfigure hardware option added (needed for x86 Futro S550 with wifi usb stick) 2017-08-06 4.2.5 Development state (NOT stable) -------------------------------------------------- openwrt - upgrade to 15.05 sysinfo - correct dhcp count sysinfo - new version (add essid, reorder statistic, bmx links, traffic shaping) sysinfo - add email notification and splash sysinfo - via http://.../sysinfo.json statistic - use iptables to collect statisitc (instead reading data from interfaces) httpd - increment timeout to 600s firmware upgrade - update filenames for new supported devices firmware upgrade - fix version check firmware upgrade - auto firmware update or gui firmware update uses https and certificate check register node - node registration uses https and certificate check. this ensures secure transfer of registration information register node - replace registration api with json (preferred gw, netid) opkg - add opkg https support (via wget->uclient-fetch) to ensure packet integrity gui-nodes - display gateways before node list gui-wlan scan - colorize wlan scan result gui-restart - separate firmware upgrade and reboot/reset gui-wan - fix wan configuration: display static settings or dhcp data gui-speedtest - change to node number gui-system - add configuration for node type (mobile,router,server) gui-wifi - display used wifi transmit power (supported by hardware) gui-contact - add geolocation support portforwarding - update portforwarding for WAN interface if wan is configured with dhcp and lan cable is inserted later backbone - use new fastd version 18+ network - bridge: enable Spanning Tree Protocol to avoid loops network - fix problem where openwrt removes all ip rules network-mtu(privnet) - fix mtu problem with private network network-mtu(fastd) - reduce fastd mtu to 1200 for some ISP (new port 5002) network meshing - add support for LAN/WAN meshing wifi - restrict wifi data rates to 6Mbit/s (add config to reduce wife data rate) OOM Killer - security-fix: reboot device when running out of memory instead of killing applications gateway-check - change ip addresses that are used to check internet connection. now freifunk server are used to allow situations where internet provider only allows internet connections to freifunk server firewall - add source ip checks to prevent fake source ip attacks bmxd - reduce gateway changes wifi-watchdog - add wifi background scan to fix issues when wifi is dead webserver - move from openssl to polarssl to save 300kbyte flash memory openvpn - move from openssl to polarssl to save 300kbyte flash memory openvpn - avoid creating openvpn connection via freifunk gateway (bat0) speedtest - move from nuttcp to iperf3 support new device - Futron S550: x86 target, usb-wlan stick (adhoc only), tcpdump, openvpn-polarssl 2016-Jan-17 4.2.2 -------------------------------------------------- traffic shaping - correct traffic shaping when using computer at LAN sysinfo - prepare sysinfo-json every minute and just return generated data via webserver to reduce loading time watchdog - add bmxd watchdog wifi - add functionality to ignore node connections via wifi and prefere lan/backbone connections between routers firewall - add port forwarding to WAN openvpn - avoid endless openvpn re-init if openvpn connections failes mesh-mtu - fix backbone connection lost errors (MTU value, TCP MMS) backbone - replace vtund with fastd private network - replace vtund with fastd gui:konfiguration - add loading/saving konfiguration inclusive reinstalling packages gui:Knoten ingoriern - now use node number instead of ip address gui:https - change configuration page link "Verwalten" to https dns - add configuration option for a second DNS 2015-Mar-09 3.1.9 -------------------------------------------------- essid - add separator and fix spaces in essid OVPNCert - add support for cyberghost vpn openvpn - fix possible interface name conflicts bmxd - fix crash when adding a lot of tunnel devices passwd - move passwd default passwd check to header line (always displayed) gui - move scripts to separate directory not accessable from webdir gateway-check - restart openvpn in case link is active but dead sysinfo-json - remove private dns ip to hide private ip address range 2015-Jan-28 3.1.8 (testing) -------------------------------------------------- openwrt - update revision bmxd - resolve internet gateway problems gateway selection - add configuration to set preferred gateway watchdog - add watchdog to reboot router (wifi stopps working on TP-Link TL-WDR4300 v1) wifi - uses same adhoc essid for all routers "Freifunk Mesh-Net" passwd - add note if password has not be changed syslog-json - add bmxd status info node registration - enable continues node registration from auto setup dns - add freifunk internal dns support wifi2 ip range - increment ip dhcp range up to 1022 hosts per node gui: firewall - some improvments when displaying firewall rules 2015-Jan-28 3.1.7 (testing) -------------------------------------------------- OPENWRT 14.07 - move to new openwrt branch (support more routers), changes majore version number dhcp - change dhcp lease to 5min default gui-dhcp - add settings for dhcp lease wifi - isolate wifi clients sysinfo - add network connections gui-log - add network connection to logs syslog - add remote syslog sysinfo-json - add timestamp, model, board_name announce gateway - correct announcing own gateway LED-boot state - show boot status LED-freifunk state - wifi led shows freifunk/gateway state firmware upgrade - add firmware file name and firmware download function nightly bmxd restart - add workaround for problem within routing protocoll bmxd, where it may happen that connection to gateway is not created firmware auto update - nightly check for new firmware version and auto update added 2014-Nov-10 (2.1.5) -------------------------------------------------- sysinfo - use cached internet tunnel info if present routing - only accept freifunk ip ranges (no internet ips), protect against HNA redirecting 2014-Nov-01 (2.1.4) -------------------------------------------------- firewall - fix problems when some nodes are not reachable wifi - change back to HT20. HT40 not suitable for adhoc in mesh network 2014-Oct-20 (2.1.3) -------------------------------------------------- internal - new node number calulation bmxd - change routing protocoll daemon. to fix some routing/gateway instabilities use primary/non-primary interfaces and different IPs firewall gui: node number - display node number in "Nodes" view gui: gateway info - add gateway infos/statistic gui: status bar - add device name sysinfo - add gateway statistic wifi 11ng - switch to 11ng to get support for MIMO and higher data rates 2014-Aug-02 (2.1.2) -------------------------------------------------- license - correct license text (now GPL3) gui-gateways - show available and selected gateway bmxd - enable two-way gateway tunnel 2014-July-14 (2.1.1) -------------------------------------------------- custom splash - change of logo possible; solve problems with links to different media gui - minor text corrections splash - add configuration to disable splash splash url - add support to include html code from other webservers (no images) license text - simple language support. set via HTTP_ACCEPT_LANGUAGE 2014-July-12 (2.1.0) -------------------------------------------------- wifi - max 32 characters for essid wifi - remove antenna setting (always use mimo) autodisconnect - fix setting of disconnect time sysinfo-json - routing table splash - remove deadlock webserver - new version uhttpd (hopefully solves hanging on port 81) internal/gui - add suport for Meisen software packets- add support to install software packages upgrade history - display firmware upgrade history internal/upgrade- correct bootconfig/upgrade process custom splash - correct display of flash usage for custom html splash - workround for Microsoft Phone 8 2014-May-21 (2.0.07) -------------------------------------------------- traffic shaping - initial added splash - splash screen: mobile layout; splash - custom html support splash - usage rules, pico agreement splash - storage of mac addresses auto disconnect - allows to disconnect wifi clients after some time firewall - some firewall fixes gui - firewall shortcut for SPLASH users gui - https/http information gui - version info at footer license/copyright - openwrt license, copy right information added sysinfo - system info request support added, to allow freifunk-dresden.de to build topology graph, collect statistics backbone - avoid backbone connection via wifi log - fix dhcp log gui - remove bmxd ajax, which was the reason for bmxd crashes gui - change http GET request to POST request (only all POST formulars) for security reasons internal - file upload clean up internal - version upgrade processing added 2013-Nov-05 (2.0.2) test version 002 -------------------------------------------------- firewall - security fix; add ports for speedtest gui - add tx power check wlan - correct regional domain (DE) sysinfo - add missing data 2013-Okt-26 (2.0.1) test version 001 -------------------------------------------------- firewall - correct forwarding (node2node) 2013-Okt-24 (2.0.0) test version 001 -------------------------------------------------- openwrt - port from whiterussian to openwrt 12.09 / 10.03 backbone - remove 172er network (uses now wifi network ip range) 2013-Mar-14 (1.6.36-dd2.4d) -------------------------------------------------- ddmesh_ipcalc - change ip range 10.12.0.0/16 to 10.200.0.0/16 (because of conflicts with Graz) - change ip calulation to support up to 63 dhcp clients (15 previously) google-maps - add random number to google maps url to always have uptodate map (google caches url requests with kmz data files) 2012-Feb-12 (1.6.36-dd2.3d) -------------------------------------------------- firewall - reworked (one file) splash - change checkbox position register - add automatic registration. No need to ask for project/node number. node number - change project/node number to global node number (independed of location) dnsmasq - dns resolution changed to remove patched clibc - configuration changed to resolve router host names (e.g.r100.ddmesh.de) (if router has connection via freifunk network to ddmesh.de) json - add json-info support webinterface - add ajax support - automatic register of router on register.ddmesh.de (remove easy setup page) - move some pages to admin area - add flush to have web pages updated in real time during some admin operations - reordering of web menu - add some configuration switches to enable/disable access to admin area from freifunk network or wan (see "System") vpn - fix routing problem by using a separate public ip for vpn.ddmesh.de ddmesh_ipcalc - router ip calculation implemented as lua script hotspot list - hotspot list on ddmesh.de shows contact data stored in each node. - email address in this list displayed as image ipkg - change handling of ipkg tool:speedtest - simple speed test function added to check connection speed to other routers auto-setup - easy setup replaces by auto-setup (automatic node registration if it has access to register.ddmesh.de via internet or freifunk network) backbone - add indicator if a backbone connection is active private network - add indicator if private network connection is active 2009-Jun-11 (1.6.36-dd2.2) -------------------------------------------------- dnsmasq-log - disable logging to syslog, which makes the syslog unusable webinterface - status line shows currently selected internet gateway toplology - support corrected to detect nodes with internet connection correctly bmxd - update of routing deamon 2009-Feb-23 (1.6.36-dd2.1) -------------------------------------------------- KIT - uses version 1.6.36 to generate firmware webinterface - icons added, wlan scan beautified vtun - slow tincd replaced by vtun (backbone,private network) private network - support to create a vpn connection between lan ports of different routers via freifunk net gateway check - fixed a bug where gateway of a route was not detected every time software list - "Software (Packetliste)" does only show well tested packets provided by freifunk dresden System packages are not removable (button removed) splash - check added for ip addresses that where not provided by dhcp server (message is displayed) easy setup - enables mini_fo by default, to overwrite old settings from different firmwares auto dns - fixes a bug while setting dns server by batmand (batmand,batmand.gw.sh) display nodes - clean up node display. quality is displayed for all nodes, IPs are only links if they belong to 10er network display hna - only nodes that have real hna are displayed easy setup - resets password to "admin" RTS/CTS - uses new settings for RTS/CTS (from freifunk berlin nord ost) batmand-bmxd - batmand (pthread-version) replaced by batman-experimental (thread-less), no need for pthread library www-links - www links updated 2008-Jul-05 (1.6.28-dd1.10) -------------------------------------------------- https - xrelayd added to support https google maps - google maps from ddmesh.de now accessible from firmware (if inet present) splash - autoclean bugfix (splash was displayed (mac removed) while dhcp was refreshed and active md5 - md5 generating corrected for firmware download at download.ddmesh.de 2008-Jun-04 (1.6.28-dd1.9d) -------------------------------------------------- batmand - auto DNS detect added. this is needed to make configuration of DNS easier 2008-Jun-04 (1.6.28-dd1.9c) -------------------------------------------------- firewall - backbone port for WANDEV enabled (INPUT), depending on if backbone is enabled 2008-Mai-24 (1.6.28-dd1.9b) -------------------------------------------------- DNS - fix DNS server for pppoed and dhcp for internet lan connection batmand - fix where batman ignores the backbone interface if connection was disabled batmand - fix for gateway connection if backbone connection was brocken 2D Barcode - added 2D Barcode 2008-Apr-06 (1.6.28-dd1.9a) -------------------------------------------------- splash - fix for stored mac addresses. Are now restored at boot time firewall - some firewall changes and fixes to access internet from lan routing - avoid routing of private ip ranges 2008-Mrz-28 (1.6.28-dd1.9) -------------------------------------------------- splash - accept screen now displays images batmand - rev1023 bugfixes for memory leak when routing class changes dnsmasq - udhcpd replaced by dnsmasq (dhcp,dns) dns - router acts as dns server for client linux kernel - firmware generated from kit 1.6.28 which contains some fixes when many network connections are active dhcp log - dhcp log added to web interface 2008-Mrz-7 (1.4.5-dd1.8h) RC2 - backbone -------------------------------------------------- backbone - firewall fix that has blocked batmand messages webif - routing throw entries removed 2008-Feb-20 (1.4.5-dd1.8g) RC1 - batmand,firewall,gps -------------------------------------------------- Diese Firmware ist als Release Candidate eingestuft. Treten keine Probleme auf, so wird diese als offizielle Version auf v 1.9 gesetzt batmand - Fehler behoben, Backbone kann jetzt genutzt werden firewall - firewall regel angepasst, damit über das backbone dns Antworten empfangen werden können gps - GPS Koordinaten können jetzt bei den Kontaktinfos eingetragen werden, ohne das man über EasySetup gehen muss, bei der verschiedene Einstellungen zurück gesetzt werden. 2008-Feb-13 (1.4.5-dd1.8f) Testfirmware - pppoe,dyndns -------------------------------------------------- pppoe und dyndns funktioniert. batmand hat immer noch Probleme wenn das Backbone aktiv ist. Wenn beim Backbone keine Verbindung zustande kommt, bleibt batmand irgendwann stehen. 2008-Feb-13 - changelog datei ausversehen gelöscht --------------------------------------------------